Off-road driving requires you to have reliable recovery points to cope with numerous recovery situations.
Don't be fooled into thinking that factory or generic tow points will be enough. They may serve well as tie down points for transporting but that's about all.
Ensure you have the right equipment when you need it the most!
These tow points have been designed based on the actual vehicle, destruction tested and put through real-life recovery situations. All of the tow points we supply have be made for use with a 3.25T Bow Shackle which we can supply separately.
All tow points have been designed for straight line pull-type recoveries and are not to be used for lifting purposes.
This is a quality, reliable product with the following features;
•Made from 10-12mm (depending on make/model) SS41 carbon steel plate
•Direct bolt onto your chassis using high tensile bolts - no cutting or welding required
•Powder coated yellow for high visibility
•Matched pair - specific to each side
•Allow for use of a bridle strap
•Holes at 85mm centres
•Working Weight Limit (WWL) of 5,000 Kg
•Elongated hole for mounting of bow shackle
Toyota Hilux 2005 onward
It has been reported that these points have had fitting issues when a Bull Bar is installed. The issue seems to be that the Shackle Hole on the Tow Point is sometimes difficult to access depending upon the bull bar and bash plate design combination. Please check that you can access both mounting holes for fit-ment, if you have a bull bar, prior to ordering these tow points.
•2 x Tow Points
•6 x Bolts
•4 x Spacers
•Flat & Spring washers
Part No. RPHIL05V2